SINGLE-PHASE ENERGY INSTRUMENTS
-
ENERGY1
KW-Buzzer Displays KW, signals when maximum demand is exceeded
- measures 0-7KW 0-14KW, single-phase, 220/240V
- displays absorbed power
- signals when max demand is exceeded
- a buzzer sounds as long as the alarm condition persists
- presettable value
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- ENERGY1 KW-Relay Displays KW and disconnects non-essential loads, if necessary
- - measures 0-7KW
0-14KW, single-phase, 220/240V
- disconnects relay no. 1 (30Amps, 240Vac)
- disconnects relay no. 2 (30Amps, 240Vac)
- signals when your target load value is about to be exceeded and cuts out a load, which remains disconnected for 2 minutes after normal conditions are restored..
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- ENERGY1 KW-Vip Displays Volt, Ampere, KW.
- - measures 0-7KW
0-14KW
- single-phase, 220/240V
- 36-72-140 Amps max
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- ENERGY1 RS485 ModBus Reads Volt, Ampere, KW, KWh, Power Factor.
- - measures
single-phase Volts, Amps, KW, KWh and Power Factor
- 36-72-140 Amps max
- 220/240Volt, 50/60Hz
- external current transformer included
- ModBus RTU protocol
- up to 127 units can be connected to one Elcomem RS485 Network, which logs all data
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- ENERGY1 VIS Single-Phase Analyzer.
- - measures Volt,
Amp, KW, partial KWh, total KWh, partial KWh consumption cost
- leakage (mA)
- 1 or 2 relay-operated alarms
- 4-module DIN version
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- PALM T1-T2 Portable Single-Phase Analyzer.
- - measures Volt,
Amp, KW, Power Factor and KWh
- leakage (mA)
- partial consumption cost
- 0-36 Amp
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
THREE-PHASE ENERGY INSTRUMENTS
- ENERGY3 VIS Three-Phase Energy Meter with Internal Current Transformers.
- - displays 16
parameters
- through cables, internal current transformers
- 36-72-140-240 Amp
- 380-400 50/60Hz
- PC connection via RS485
- true RMS value
- power is supplied by tightening 3 screws on the instrument front
- CATALOGUE
- APPLICATION NOTE
- INSTALLATION MANUAL
- USER MANUAL
- SOFTWARE
- ENERGY EM3D T10 Three-Phase Analyzer.
- -displays 38
parameters
- 5Amp input
- 380-400Volt, 50/60Hz
- 230V power supply
- true RMS value
- available in a 144x144mm panel-mounted version and in a 9-module DIN version
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- ENERGY EM3D T15 SC1 (1 relay) - SC2 (2 relays).
- - displays 38
parameters
- 1 load-shedding relay (5 amp)
- 2 load-shedding relays (5 amp)
- prevents your target load value from being exceeded
- 5-Amp input
- 230V power supply
- disconnects 1-2 non-priority loads
- available in a 144x144mm panel-mounted version and in a 9-module DIN version
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- ENERGY EM3D T28-232/485 - EM3-144 T28-232/485.
- - displays 38
parameters
- 32KB storage capacity
- RS232 or RS485
- 5-Amp input
- 230V power supply
- stores max 2900 lines of information (with date and time)
- available in a 144x144mm panel-mounted version and in a 9-module DIN version
- ENERGY EM3 TB Portable Analyzer.
- - 36 different
models
- displays 38 parameters
- 32KB storage capacity
- PC connection via RS232
- 230V power supply
- ideally suited for series measurements
- stores max 2900 lines of information
- date and time
SINGLE-PHASE ENERGY METER
- EL 5/30A KWh.
- - single-phase
KWh meter
- 30 Amps - 220/240Volts
- output: 100 pulses/1KWh
- 1-module DIN version
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- ENERGY1 KWh 36-72-140 amp. - Pulse Output.
- - single-phase
KWh meter
- 36-72-140 Amps max
- 220/240Volts 50/60Hz
- 100 pulses/1KWh
- 1 mechanical counter
- current transformer included
- 2-module DIN version
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
THREE-PHASE ENERGY METER
- ENERGY3 KWh 5-36-72-140-240Amp - Internal Current Transformers.
- - three-phase
KWh meter
- through cables with 3 internal CTs
- power is applied by tightening 3 screws on the instrument front
- 1 mechanical counter
- 380/400 Volt 50/60Hz
- 6-module DIN version
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
PULSE COUNTER
- ENERGY ELCOMEM24 Pulse Counter.
- - data logger
- max 24 Energy units provided with pulse outputs
- PC connection via Ethernet or RS485
- 220/240Volt 50/60Hz
- 6-module DIN version.
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- ENERGY ELCOMEM24 Time Bands.
- - data logger
- max 24 Energy units provided with pulse outputs
- PC connection via Ethernet or RS485
- energy consumptions divided according to time bands
- 220/240Volt 50/60Hz
- 6-module DIN version.
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- ENERGY ELCOMEM RS485 Network.
- - 32 Energy
units can be connected via RS485
- PC connection via Ethernet or RS232/485
- 220/240Volt 50/60Hz
- 6-module DIN version.
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
POWER QUALITY TESTER
- Power Quality Tester (Volt, Amp., KW).
- - true RMS value
(Volt, Amp, KW)
- 3000 Amps max
- non-interrupted harmonic analysis of up to the 50th
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
ACCESSORIES - APPLICATIONS
- Split-core Transformers.
- - 100 to
2500Amp/5
- flexible current transformers from 500 to 3000Amp/1Vac
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE
- Laboratory Power Supply with Incorporated Palm.
- - measures
Volts, Amps, KW, Power Factor, KWh
- consumption cost/hour
- displays: 0-260 Volts, 0-12 Amps, 0-3 KW, ind-cap power factor
- CATALOGUE
- APPLICATION NOTE
- USER MANUAL
- SOFTWARE